Roland Metaza MPX-90 - Step1: Determine the Shape and Size of Material

46
3-3 Preparing Print Data (METAZAStudio)
Chapter 3 Making Prints
Step1 : Determine the shape and size of material.
This section explains the shape and size of material to be determined by METAZAStudio when using the plate
as explained below. METAZAStudio has a number of dierent types of material preregistered. Use the material
with the “tag” name, which has the same shape as the plate used
 P. 33, "Preparing Material to Print"
 When you want to print on cylindrical material and other curved surfaces,
see the section given below.
 P. 77, "4-5 Printing on a Curved Surface"
 If you want to register new material, see the section given below.
 P. 82, "4-6 Register New Material"
Procedure

Click .
The [Material] window appears.
40 mm
25 mm