Roland Metaza MPX-90 - Starting and Stopping Printing; Starting Printing

52
Chapter 3 Making Prints
3-4 Starting and Stopping Printing
Starting Printing
Important!
Never attempt printing in any of the following situations.
 When no material is loaded
 When the head is not set at an appropriate position based on the surface height of the material in the case
that you do not use the head cap.
 P. 36, "Loading Material Using the Adhesive Sheet," p. 41, "Loading Material Using the Center Vise"
Procedure

Close the cover.

Click
The [Print] dialog box appears.

Make sure [Roland MPX-90] is
chosen as the printer name.
Click [Properties].