Roland Metaza MPX-90 - Switching off the Power

31
Chapter 3 Making Prints
3-1 Switching the Power On and Off
Description
When the power is ON in the state shown in the gure , there are cases where the power lamp blinks and
an error occurs immediately after the initial operation is completed. To clear the error, take the procedure

and press the Power/Movement button. The power lamp stops blinking and lights.
Switching Off the Power
Hold down the Power/Movement button for one second or longer.
The light goes dark and the power is switched o.
Power/Movement button
Hold down the button
for one second or
longer.