Roland Metaza MPX-90 - Page 81

79
Chapter 4 More Advanced Operations
4-5 Printing on a Curved Surface

Make sure [Roland MPX-90] is
chosen as the printer name.
Click [Properties].

Click the [Material] tab.
Set [Diameter] to 10 millime-
ters.
Select [Direction].
Make horizontal writing on portrait
material.
Vertical
Horizontal
In this example, select (vertical).
Click [Enter].
Under [Work Size], the value for [Width]
is set automatically.
For [Length], in this example, make the
setting of 50 millimeters.
Click [OK].

Click [OK].
This is the end of the printing area set-
ting.