Roland Metaza MPX-90 - Page 39

37
Chapter 3 Making Prints
3-2 Getting Ready

Afx the adhesive sheet to the
table.
Mount the material on the
sheet.
Press down lightly on the material to
secure it in place.
Continue on the next page
Mounting the Adhesive Sheet
 Place it straight, aligned with the scale marks on the table.
 Place inside the table frame.
 Be careful not to allow any air bubbles to form between the adhesive sheet and the table.
Handling of the Adhesive Sheet
 If the adhesive force has been reduced, then wash the adhesive sheet.
 P. 88, "Cleaning the Adhesive Sheet"
 Never rub the surface with force. Doing so may damage the surface and reduce its adhesive strength.
How to Place Material
When material is small enough to be placed within the table
Place the material at the center of the
scale on the table.
Center Line
Center Line
Material
Center of the
material
Adhesive
sheet