Roland RS-9 - Page 143

143
Parameter List
Parameter List
10: LIMITER (p. 87)
11: HEXA-CHORUS (p. 88)
12: TREMOLO CHORUS (p. 88)
13: SPACE-D (p. 89)
14: STEREO CHORUS (p. 89)
15: STEREO FLANGER (p. 90)
16: STEP FLANGER (p. 91)
17: STEREO DELAY (p. 92)
18: MODULATION DELAY (p. 93)
Parameter Name Full Name of Parameter Value
Threshold Threshold Level 0–127
Ratio Compression Ratio 1.5:1, 2:1, 4:1, 100:1
Release Release Time 0–127
Post Gain Post Gain 0, +6, +12, +18 [dB]
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Pan Output Pan L64–63R
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Pre Delay Dev Pre Delay Deviation 0–20
Depth Dev Depth Deviation -20– +20
Pan Dev Pan Deviation 0–20
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Chorus Rate Chorus Rate 0.05–10.00 [Hz]
Chorus Depth Chorus Depth 0–127
Tremolo Phase Tremolo Phase 0–180 [deg]
Tremolo Rate Tremolo Rate 0.05–10.00 [Hz]
Tremolo Sep Tremolo Separation 0–127
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Phase Phase 0–180 [deg]
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Phase Phase 0–180 [deg]
Filter Type Filter Type OFF, LPF, HPF
Cutoff Freq Cutoff Frequency 200–8000 [Hz]
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Feedback Feedback Level -98– +98 [%]
Phase Phase 0–180 [deg]
Filter Type Filter Type OFF, LPF, HPF
Cutoff Freq Cutoff Frequency 200–8000 [Hz]
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Pre Delay Pre Delay Time 0.0–100 [ms]
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Feedback Feedback Level -98– +98 [%]
Phase Phase 0–180 [deg]
Step Rate Step Rate 0.1–20.0 [Hz],
note-value symbols
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Delay Left Delay Time Left 0.0–500 [ms]
Delay Right Delay Time Right 0.0–500 [ms]
Feedback Feedback Level -98– +98 [%]
Feedback Mode Feedback Mode NORMAL, CROSS
Phase Left Feedback Phase Left NORMAL, INVERT
Phase Right Feedback Phase Right NORMAL, INVERT
HF Damp HF Damp 200–8000 [Hz],
BYPASS
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127
Parameter Name Full Name of Parameter Value
Delay Left Delay Time Left 0.0–500 [ms]
Delay Right Delay Time Right 0.0–500 [ms]
Feedback Feedback Level -98– +98 [%]
Feedback Mode Feedback Mode NORMAL, CROSS
Rate Rate 0.05–10.00 [Hz]
Depth Depth 0–127
Phase Phase 0–180 [deg]
HF Damp HF Damp 200–8000 [Hz],
BYPASS
Low Gain Low Gain -15– +15 [dB]
High Gain High Gain -15– +15 [dB]
Balance Effect Balance D100:0W–D0:100W
Level Output Level 0–127