Roland RS-9 - Chapter 2. Part Volume and Pan Settings

66
Chapter 2. Part Volume and Pan Settings
You can make separate volume and pan (sound-image
localization) settings for each individual Part in a
Performance.
Level
Set the volume of each part. This is mainly used to achieve
the volume balance between Parts when Key Mode is set to
Split or Dual.
Value: 0–127
Pan
When stereo output is used, this setting sets the pan position
(stereo location) of each Part. With an increase in the value
for L, more of the sound will be heard as coming from the left
side. Similarly, more of the sound will originate at the right if
the value of R is increased. When set to RANDOM, you
obtain a specialized effect whereby the sound randomly
moves left and right with each key stroke.
Value: RANDOM, L63–0–63R
* In the case of a Drum Set, the pan position has been fixed for
each percussion instrument (p. 112). When setting the pan for
a Part to which a Drum Set is assigned, the panning of the
entire drum set is moved.
1. Press [EDIT], getting the indicator to light.
2. Use VALUE [-]/[+] to select “Performance Part.”
3. Press [ENTER].
4. Press PART [ ]/[ ] to select the Part.
5. Press the numeric key [3] several times to select the item
you wish to set.
fig.R02-01
6. Use VALUE [-]/[+] to set the value.
7. Press [EDIT].
The [EDIT] indicator goes out, and you are returned to
the previous screen.