Roland RS-9 - Changing the Brightness of the Sound and Adding Special Qualities (FILTER)

55
Using the Convenient Functions in Performances
Using the Convenient Functions in Performances
Changing the Brightness of the Sound and Adding
Special Qualities (FILTER)
You can change the brightness of the sound and give the sound peculiar
characteristics using the FILTER 2 knob.
fig.Q-66
1
Turn the FILTER CUTOFF knob.
Turning this to the right (clockwise) brightens the sound, while turning it to
the left (counterclockwise) makes the sound seem darker.
2
Turn the FILTER RESONANCE knob.
Turning this to the right makes the special quality of the sound stronger,
while turning it to the left reduces these characteristics.
1 2
[MANUAL] and [ARPEGGIO/CONTROL] Functions
When [ARPEGGIO/CONTROL] is set to ON, you then become able to
control another parameter using the LFO ENVELOPE 4 knob (p. 74). What’s
more, when [ARPEGGIO ON/OFF] is set to ON, and [ARPEGGIO/
CONTROL] is flashing, you can use the four knobs to change the arpeggio
settings in real time (p. 74).
When you press [MANUAL], the parameters assigned to the six knobs are
set to the values at the current knob positions (p. 74).
When you want to know about changing the tone in real time in greater
detail
• “Chapter 4. Changing Tones in Real Time” (p. 71)