Roland RS-9 - Page 57

57
Using the Convenient Functions in Performances
Using the Convenient Functions in Performances
1
Press [PERFORM/TONE] to call up the Performance selection
screen.
When in Single Mode
fig.Q-69exp
When in Split or Dual Mode
fig.Q-70exp
2
Press [USER/PRESET] to select the group (User, Preset).
3
Press the numeric keys ([1]–[0]) to specify the Performance
number (1–128).
4
Press [ENTER] to finalize the entry.
Performance Group
Performance Number
Part
Performance NamePerformance selection screen
Performance Number
Performance Number
Lower Part
Upper Part
Performance Name
Performance Group
Performance
Number
Performance
selection screen
Current Part
If “PERFORM” does not
appear in the display, press
[PERFORM/TONE] once
more to switch to the
Performance selection
screen.
If you make a mistake,
press [EXIT] and specify
the number once more.
Instead of using Steps 3
and 4, you can also switch
Performances by pressing
VALUE [-]/[+].
When you want to know a Performance’s name and number
• “Performance List” (p. 147)
When you want to know what settings can be stored in a Performance
• “Parameter List (Performance)” (p. 137)
When you want to store a Performance you have created to User
memory
• “Saving Tone / Drum Set / Performance” (p. 113)