Roland SP-404MK - Customizing the Opening Screen

CustomizingThisUnit
CustomizingtheOpeningScreen
Youcanuseyourowncustomimagesfortheopeningscreen.
Twoopeningimagescanberegisteredperproject.
Stepsforsettingyourcustomimagedataastheopening
image
Youmustperformthefollowingoperations(summarized)touseyourcustomimagedataastheopeningimage.
Createyourcustomimage(PreparingaScreenSaverImage).
1
ExporttheprojecttoanSDcard(ExportingaProject(EXPORTPROJECT)).
2
SaveyourcustomimagestotheSDcard(SavingtheScreenSaverImagetoaProject).
3
LoadtheprojectfromtheSDcard(ImportingaProject(IMPORTPROJECT)).
4