Roland SP-404MK - Saving an Opening Image to a Project

CustomizingThisUnit > CustomizingtheOpeningScreen
SavinganOpeningImagetoaProject
Hereʼshowtosaveyourcustomimagetoaproject.Asanexample,thefollowingshowshowtochangetheopening
imageofproject01toyourowncustomimage.
Exporttheprojectforwhichyouwanttochangetheopeningimage(project01inthisexample)toanSD
card(“ExportingaProject(EXPORTPROJECT)”).
1
RemovetheSDcardfromthisunit,andopenthecontentsonyourcomputer.
2
CopytheopeningimagethatʼssavedintheSDcardtothe“EXPORT/PROJECT/PROJECT01/PICTURE”
folder.Changethefilenameto“startup*.bmp”,replacingtheasteriskwithanumberfrom1to2.
Fordetailsonthe“/EXPORT/PROJECT/PROJECT01/PICTURE”folder,seethefolderstructurediagram
shownin“Importing/Exporting(UsingtheSDCard).”
3
RemovetheSDcardfromyourcomputer,andinsertitintothisunit.
4
Importtheprojectinwhichtheopeningimageisregistered(“ImportingaProject(IMPORTPROJECT)”).
Yourcustomopeningimageisdisplayedfromthenexttimetheunitstartsup.
5