Roland SP-404MK - Editing Unit Settings (System)

ConfiguringtheVariousSettings(UTILITY)
EditingtheSettingsRelatedtothisUnit(System)
Hereʼshowtoconfiguretheoverallsettingsforthisunit.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“SYSTEM,”andpressthe[VALUE]knob.
Thesystemsettingscreenappears.Eachparameterisshownasdividedintofivetabs(groups).
2
Turnthe[CTRL3]knobtoselectatab.
Selectthetaboftheparameteryouwanttoedit.
3
Turnthe[VALUE]knobtomovethecursortotheparameterthatyouwanttoedit,andpressthe
[VALUE]knob.
Thevaluedisplayishighlighted,andyoucannoweditthevalue.
Fordetailsontheparameters,referto“SYSTEM”intheParameterGuide.
4
Turnthe[VALUE]knobtoeditthevalue,andpressthe[VALUE]knob.
Thisconfirmsthevalue.
5
Pressthe[EXIT]buttontoreturntotheUTILITYMENUscreen.
6