Roland SP-404MK - Assigning Effects to Buttons (DIRECT FX)

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
AssigningtheDesiredEffecttoanEffectButton(DIRECTFX)
Youcanassigntheeffectsyouliketotheeffectbuttonsonthetoppanel.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
2
Turnthe[CTRL3]knobtoselect“DIRECT.”
3
Usethe[VALUE]knobtoselecttheeffectbuttontowhichtheeffectistobeassigned.
Effectbuttontoassign Parameter
[FILTER+DRIVE]button DirectFX1
[RESONATOR]button DirectFX2
[DELAY]button DirectFX3
[ISOLATOR]button DirectFX4
[DJFXLOOPER]button DirectFX5
Youcanalsopressaneffectbuttontochangeitsassignedeffect.
4
Pressthe[VALUE]knob.
Thevaluedisplayishighlighted,andyoucannowchangetheeffects.
5
Usethe[VALUE]knobtoselecttheeffect,andpressthe[VALUE]knob.
Theeffectisassignedtotheeffectbuttonyouselected.Afterthis,youcanusetheeffectbuttonsonthe
toppaneltoswitchtheassignedeffectson/off.
6
Tofinishmakingsettings,pressthe[EXIT]button.
7