Roland SP-404MK - Editing Effects for BUS 3 and BUS 4

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
EditingtheEffectsforBUS3andBUS4
Hereʼshowtoedittheeffects(BUS3,BUS4)appliedtotheoverallsound.
See“EditingtheEffects”forhowtoedittheeffects(BUS1,BUS2)appliedtoasample.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
2
Usethe[CTRL3]knobtoselect“BUS3”or“BUS4.”
Selectthebuswhoseeffectyouwishtochange.
ToeditBUS3andBUS4,youmustselectafavoritefrom“FAVORITE1”to“FAVORITE16”inthe
“FAVORITE”tabscreen.
3
Turnthe[VALUE]knobtosettheparametertoedit.
4
Usethe[CTRL1]‒[CTRL3]knobstoedittheparameter.5
Tofinishmakingsettings,pressthe[EXIT]button.
6