Roland SP-404MK - Changing Effects for BUS 3 and BUS 4

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
ChangingtheEffectsAssignedtoBUS3andBUS4
Changesthetypeofeffectstoapplytotheoverallsound.
Referto“AddingEffectstoaSample(BUSFX)”tochangethetypeofeffects(BUS1,BUS2)thatareappliedtothe
samples.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
2
Turnthe[CTRL3]knobtoselect“FAVORITE.”
3
Turnthe[VALUE]knobtoselect“FAVORITE1”through“FAVORITE16.”
Theeffectsyouselectedin“FAVORITE1”through“FAVORITE16”areappliedtotheoveralloutputaudio.
4
Usethe[CTRL3]knobtoselect“BUS3”or“BUS4,”andpressthe[VALUE]knob.
Thevaluedisplayishighlighted,andyoucannowchangetheeffects.
5
Usethe[VALUE]knobtoselecttheeffect,andpressthe[VALUE]knob.
ThisconfirmstheEFXType.
6
Tofinishmakingthesettings,pressthe[EXIT]button.
7