Roland SP-404MK - Adding Effects to Overall Sound (BUS 3, BUS 4)

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
AddingEffectstotheOverallSound(BUS3,BUS4)
Hereʼshowtoapplyeffectstotheoverallsoundoutputfromthisunit.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
2
Turnthe[CTRL3]knobtoselect“FAVORITE.”
3
Turnthe[VALUE]knobtoselect“FAVORITE1”through“FAVORITE16.”
Theeffectsyouselectedin“FAVORITE1”through“FAVORITE16”areappliedtotheoveralloutputaudio.
4
Tofinishmakingthesettings,pressthe[EXIT]button.
5