Roland SP-404MK - Configuring Effect Routing

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
ConfiguringtheEffectRouting
Thisshowshowtoedittherouting(connectionorder)fortheeffectsbuiltintothisunit.
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
2
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
3
Usethe[CTRL3]knobtoselect“FAVORITE,”andpressthe[VALUE]knob.
ThepositionoftheeffectassignedtoBUS1andBUS2changeseachtimeyoupressthe[VALUE]knob
(“UsingtheEffects”).
4
Tofinishmakingthesettings,pressthe[EXIT]button.
5