Roland SP-404MK - Sending Input Audio to a Bus

ConfiguringtheVariousSettings(UTILITY) > ConfiguringtheEffectSettings(EFXSET)
SendingtheAudioInputfromtheINPUTJacktoaBus
YoucansetthebustowhichtheplaybackaudiosignalscomingintotheINPUTjackaresent(meaningwhicheffects
areused).
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
1
Usethe[VALUE]knobtoselect“EFXSET,”andpressthe[VALUE]knob.
Theeffectsettingscreenappears.
Fromthetopscreen,youcanalsomakethisscreenappearbypressingpad[16]whileholdingdownthe
[SHIFT]button.
2
Turnthe[CTRL3]knobtoselect“OTHER.”
3
Usethe[VALUE]knobtomovethecursorto“InputBus,”andpressthe[VALUE]knob.
Thedisplayedvalueishighlighted,andyoucannowedittheInputBus.
Value Explanation
DRY ThesignalisnotsenttoBUS1,BUS2(theBUS1andBUS2effectsarenotused).
BUS1,BUS2 ThesignalissenttoBUS1orBUS2.TheeffectssetforBUS1andBUS2areused.
4
Usethe[VALUE]knobtoselectthebus,andpressthe[VALUE]knob.
Thisconfirmsthebustowhichtheinputaudioissent.
5
Tofinishmakingsettings,pressthe[EXIT]button.
6