Roland SP-404MK - Page 133

NeverturnoffthepowerorremovetheSDcardwhilethescreenindicates“Working...”
yellow
Blinkingred Padtowhichimportedsampleisassigned(importdestinationpad)
Litred Padtowhichimportedsampleisassigned(overwriteandimporttoapadthat
alreadyhasasampleassignedtoit)
Usethe[VALUE]knobtoselectthesampletoimport,andpressthe[VALUE]knob.
Thesamplesareimportedandassignedtotheselectedpads.
Youcanpreviewtheselectedsamplebypressingthe[SUBPAD]button.
Whenselectingsamplesinsideafolder,usethe[VALUE]knobtoselectthefolder,andthenpress
the[VALUE]knob.
Holddownthe[SHIFT]buttonandturnthe[VALUE]knobtoselectmultiplesamples.
Whenimportingasampletoapadthatalreadyhasanassignedsample(padsthatarelitupred),a
confirmationmessageappears,askingifyouwanttooverwritethesample.
Tooverwritethesampleandimportanewsample,turnthe[VALUE]knobtoselect“OK,”andpressthe
[VALUE]knob.
Performingthisoperationoverwrites(erases)thesampleinthecopydestinationpad.
8