Roland SP-404MK - Restoring from Backup Data (RESTORE)

ConfiguringtheVariousSettings(UTILITY) > Importing/Exporting(UsingtheSDCard)
RestoringfromBackupData(RESTORE)
YoucanusethebackupdatathatyoucreatedwiththebackupfunctiontorestorethedatatotheSP-404MKⅡ.
Notethatonceyourestoredataonthisunitfromthebackupdata,alldatathatwassavedonthisunitiserased
(overwritten).
Tosavethedataofthisunit,usethebackupfunctiontomakeabackup.
NeverturnoffthepowerorremovetheSDcardwhilethescreenindicates“Working...”
InserttheSDcardonwhichthebackupdataissavedintotheSDcardslotofthisunit.
1
Holddownthe[SHIFT]buttonandpressthepad[13].
TheUTILITYMENUscreenappears.
2
Usethe[VALUE]knobtoselect“BACKUP,”andpressthe[VALUE]knob.
TheUTILITY/BACKUPRESTOREscreenappears.
3
Usethe[VALUE]knobtoselect“RESTORE,”andpressthe[VALUE]knob.
Thebackupnumberselectionscreenappears.
4
Usethe[VALUE]knobtoselectabackupnumberwhichyouwanttorestore(01‒64),andpressthe
[VALUE]knob.
Aconfirmationmessageappears,askingifyouwanttooverwrite.
5
Tooverwritetheexistingdataandrestorethebackupdata,turnthe[VALUE]knobtoselect“OK,”and
pressthe[VALUE]knob.
Thisrestoresthebackupdatatothisunit.
6