Roland SP-404MK - MIDI Settings; Gain Settings

MIDI
Parameter Value Explanation
MIDISync Specifiesthetemposource.
Auto ThetempoautomaticallysynchronizestotheMIDIclocksifMIDIclocksareinputviathe
MIDIINconnectorortheUSBport.
Internal Thetempospecifiedonthisunitisused.
MIDI ThetemposynchronizestotheMIDIclocksreceivedviatheMIDIINconnector.
USB ThetemposynchronizestotheMIDIclocksreceivedviatheUSBport.
MIDISync
Out
OFF,
ON
WhenthisisON,clocks,startandstoparetransmittedtothedeviceconnectedtothis
unitʼsMIDIOUTconnector.
Soft
Through
OFF,
ON
IfthisisON,MIDImessagesthatareinputtedtotheMIDIINconnectorarere-
transmittedwithoutchangefromtheMIDIOUTconnector.
USB-MIDI
Thru
OFF,
ON
WhenthisisON,MIDIsignalsthatareinputtedviatheUSBportareoutputtedtothe
MIDIOUTconnector.MIDIsignalsthatareinputtedviatheMIDIINconnectorarealso
outputtedtotheUSBport.
TheinputtedMIDIsignalsarealsotransmittedtotheinternalsoundmoduleatthe
sametime.
GAIN
Parameter Value Explanation
Attenuator OFF,ON WhenthisisON,thegainoftheaudioinputfromtheLINEINjacksis
lowered.
TurntheAttenuatoronwhentheLINEINinputseemstobedistorting.
NoiseGate ReducesthenoisefloorinthesignalinputfromtheLINEINandINPUTjacks.
OFF Thenoisegateisnotused.
-9dB,-12dB,
-18dB
Reducesthenoiseflooratthespecifiedlevel.