Roland SP-404MK - Page 154

Appendix > MFXList
Filter+Drive
Thisisafilterwithoverdrive.
Itcutsthespecifiedfrequenciesandaddsdistortion.
Parameter Value Explanation
CUTOFF 20‒16000
(Hz)
Setsthecutofffrequencyrangeinwhichthefilterworks.
RESONANCE 0‒100 Adjuststhefilterʼsresonancelevel.
Thelargerthevalue,themorethatthefrequencyrangesetinCUTOFFis
emphasized.
DRIVE 0‒100 Addsdistortion.
FLTTYPE Setsthetypeoffilter.
HPF Cutsoffthelowfrequencies.
LPF Cutsoffthehighfrequencies.
LOWFREQ 20‒16000
(Hz)
AdjuststhefrequencyrangethatʼsboostedorcutbytheLOWGAINparameter.
LOWGAIN -24‒24(dB) Adjuststheamountofboost/cutappliedtothefrequencyrangethatʼssetin
LOWFREQ.