Roland SP-404MK - Page 196

[BUSFX]button MUTEBUS Temporarilyturnsofftheaudiosenttothebus(thesampleplayback
soundorthesoundinputtedtotheINPUTjack),andoutputsonlythe
soundoftheeffect.
→“TemporarilyOutputOnlytheEffectSound(MUTEBUS)”
[HOLD]button PAUSE Pausesthesamplethatʼscurrentlyplayingback.
→“PausingtheSoundofaSample(PAUSE)”
[EXTSOURCE]
button
INPUTSETTING Displaystheinputsettingscreen.
→“ConfiguringtheSamplingSettings(RECORDSETTING)”
[SUBPAD]button PROJECT DisplaystheSELECTPROJECTscreen.
→“SelectingaProject”
Shortcutsthatusethe[REMAIN]button
Whileholdingdownthe
[SHIFT]button
Function(explanation)
Pads[1]‒[16] Setswhichsampleplaybackaudioissenttowhichbus(meaningwhicheffects
areused)foreachsample.
→“DecidingonEffectstoUseforEachSample”
Bank[A/F]‒[E/J]buttons Setsthebussenddestinationforallsamplesinabank.
[MFX]button Makestheeffecteditscreenkeepdisplaying.
→“EditingtheEffects”
[BUSFX]button Exchanges(swaps)theeffectsofBUS1andBUS2.
Shortcutsthatusethe[VALUE]knob
Whileholdingdownthe[VALUE]knob Function(explanation)
Effectbuttons([FILTER+DRIVE]‒[MFX]
button)
Applieseffectsonlywhileyouholddowntheeffectbuttons(EFFECT
GRAB).
→“TurningEffectsOn/OffattheDesiredTiming”
Pads[1]‒[16] Selectsasample(nosoundisproduced).
Shortcutsthatusethe[DEL]button