Roland SP-404MK User Manual

LocalOn/Off  
AllNotesOff  
ActiveSensing ○ ○
SystemReset  
Notes *1:
MIDIchannels
CH1:BankA CH6:BankF
CH2:BankB CH7:BankG
CH3:BankC CH8:BankH
CH4:BankD CH9:BankI
CH5:BankE CH10:BankJ
*2:EnabledwhenINPUTFXis“Vocoder”(MIDICH11).
*3:OutputwhenMIDISyncOutis“ON”andwhenthereisnotempoinputfromanexternal
device.
*4:Enabledwhenthisunitisinremotemode(whenatemposignalisreceivedfromanexternal
device).
*5:AllsamplesstopplayingbackwhentheMIDIcableisunplugged.
Mode1:OMNION,POLY
Mode2:OMNION,MONO
Mode3:OMNIOFF,POLY
Mode4:OMNIOFF,MONO
○:Yes
:No

Roland SP-404MK Specifications

General

Brand	Roland
Model	SP-404MK
Category	Synthesizer
Language	English