Roland SP-404MK - Configuring Sampling Settings

Sampling(SAMPLING)
ConfiguringtheSamplingSettings(RECORDSETTING)
Hereyoucanconfigurethesettingsforsampling,suchastherecordinglevel,aswellasapplyinputeffectstothe
soundinputfromanexternalsource.
Insamplemode,pressthe[REC]button.
Theunitenterssamplingstandbymode.
1
Pressthe[RECORDSETTING]button.
Theinputsettingscreenappears.
2
Usethecontrollerstoedittheparameters.
Controller Parameter Value Explanation
[CTRL1]knob RECBPM 40.0‒
200.0
Specifiesthetempo.Usethe[CTRL1]knobwhile
holdingdownthe[SHIFT]buttontosetthevaluemore
precisely.
Youcanalsosetthetempousingthetaptempo
function.“SettingtheTempoinTimewiththeRhythm
(TapTempo)”
[SHIFT]button
+[CTRL1]
knob
[CTRL2]knob ROUTING Thisselectsthesourcetosample(theinputsource).
Mix Samplesthemixedaudiofromthisunit(theplayback
audio)andtheinputfromanexternalsource.
ExtIn Samplesonlytheaudioinputfromanexternaldevice.
[SHIFT]button
+[CTRL3]
knob
PAN L:50‒
R:50
Adjuststhepanposition(theleft-rightvolumebalance
whensampling).
[CTRL3]knob LEVEL 0‒
127
Adjusttherecordinglevel.
3