Roland TAIKO-1 - Page 37

Making Overall Settings for the TAIKO-1 (Others)
37
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
TOMOE
Refer to “Functions
that Can Be
Assigned to the
Assignable Button”
(p. 37).
You can assign functions to the [
] (TOMOE)
button, and to the [ ] (TOMOE) button
plus the F1/F2 buttons (assignable button).
TOMOE+F1
TOMOE+F2
Favorite Kit KIT 1–KIT 100
Sets the kit to be recalled when the
assignable button is set to FAV KIT.
3. Press the F1 button several times to return to the top
screen.
Functions that can be assigned to the footswitch
(Foot Sw1/Foot Sw2)
Value Explanation
OFF No function is assigned.
KIT# Inc Calls up the next kit.
KIT# Dec Calls up the previous kit.
Ji-uchi# Inc Calls up the next ji-uchi.
Ji-uchi# Dec Calls up the previous ji-uchi.
Ji-uchi
p
Plays the ji-uchi.
Ji-uchi
q
Stops the ji-uchi.
Ji-uchi
p
/
q
Plays/stops the ji-uchi.
MFX1 On/O Turns the multi-eect 1 on/o.
MFX2 On/O Turns the multi-eect 2 on/o.
MFX3 On/O Turns the multi-eect 3 on/o.
All SoundO Stops the sounds of the taiko and ji-uchi that are playing.
* When MFX 1/2/3 are switched on/o, the parameters that switch the
MFX on/o do not change even with the pedal on/o operations. For this
reason, the on/o indication on the display may not be in sync with the
actual operation. This is reset when switching to a dierent kit.
Functions assigned to the pedals (Pedal1/Pedal2)
Value Explanation
OFF No function is assigned.
Pitch Controls the taiko’s pitch.
Decay Controls how quickly the sound decays.
Inst Level Controls the volume of the instrument.
MFX1 Level Controls the volume of multi-eect 1.
MFX2 Level Controls the volume of multi-eect 2.
MFX3 Level Controls the volume of multi-eect 3.
Master Vol Controls the overall volume of the TAIKO-1.
Ji-uchi Tempo Controls the tempo of the ji-uchi.
Ji-uchi Vel Controls the velocity of the ji-uchi.
Ji-uchi Vol Controls the volume of the ji-uchi.
MEMO
5 When using a setting other than Pitch or Decay, the pedal state is prioritized
over the parameter settings when you switch to a dierent kit (when a pedal is
connected).
5 To control the Pitch, Decay and Inst Level, you must enable/disable them for each
kit, in addition to making the settings here. For details, refer to “Controlling the
Sounds Using a Connected Pedal (Pedal Control)” (p. 21).
Functions that Can Be Assigned to the Assignable Button
(TOMOE/TOMOE+F1/TOMOE+F2)
Value Explanation
OFF No function is assigned.
Fav Kit Displays the top screen and recalls the kit set in Favorite Kit.
Kit The top screen appears.
Ji-uchi
p
/
q
Plays/stops the ji-uchi.
Metronome Plays/stops the metronome.
Button Lock
Disables the button operations.
(except for the assignable button).
Trig Lock
Enables/disables the feature that prevents the currently edited pad
from changing when struck.
All SoundO Stops all sounds that are currently playing.