Roland TR-8S - Saving the Pattern, Kit, or System Settings (WRITE)

29
Editing a Kit’s Settings (KIT Edit)
Saving the Pattern, Kit, or System Settings (WRITE)
Here’s how to save a pattern or kit.
1. Press the [WRITE] button.
The WRITE screen appears.
2. Use the [VALUE] knob to select what you want to
save, and press the [ENTER] button.
The WRITE screens appear in the order of “Pattern”
0
“Kit”
0
“System.”
* If “System” is selected, a confirmation screen appears. Proceed to
step 4.
3. Use the [VALUE] knob to select the save-
destination, and press the [ENTER] button.
A confirmation message appears.
4. To save, use the [VALUE] knob to select “O K ,” and
press the [ENTER] button.
If you decide to cancel, use the [VALUE] knob to select “Cancel,”
and then press the [ENTER] button.
Shortcuts for save operations
Operation Operating the Unit
Save a pattern
(PATTERN WRITE screen)
Hold down the [WRITE] button and
press the [PTN SELECT] button.
Save a kit
(KIT WRITE screen)
Hold down the [WRITE] button and
press the [KIT] button.
Save the pattern and kit
simultaneously
(OVERWRITE)
Hold down the [SHIFT] button and
press the [WRITE] button.
* The selected pattern and kit are
overwrite-saved.