8
Overview of the TR-8S
PATTERN No. 8-16
PATTERN No. 1-3
PATTERN No. 1-2
PATTERN No. 1-1
128 patterns
(16 x 8 banks)
PATTERN
KIT
number
TR-8S
Import
Backup/Restore
Export/Import
KIT No. 128
KIT No. 3
KIT No. 2
KIT No. 1
INST
INST
parameter
INST
tone
INST
EFFECT
BD
INST
parameter
INST
tone
INST
EFFECT
SD
INST
parameter
INST
tone
INST
EFFECT
RC
MASTER
FX
REVERB
DELAY
EFFECT
setting
KIT
parameter
128 KITs
KIT
FILL IN
FILL IN 1
FILL IN 2
ACB tone SAMPLE tone
PRESET PRESET
USER
SYSTEM
setting
INST tone
Audio
files
SD card
LAST STEP setting
Motion data for REVERB/DELAY/MASTER FX
VARIATION A–H
TRACK
BD
STEP data
MOTION data
SD
STEP data
MOTION data
RC
STEP data
MOTION data
TRIGGER
OUT
STEP data
ACCENT
STEP data
SAMPLE
parameter
BACKUP data
Export data
A B C D
E F G H
VARIATION
Last Step setting for
each instrument
Pattern
setting
* If you want to make a backup, save the data (patterns, kits, system
settings) before you proceed. The backup will not include the pattern or
kit that you’re currently editing (shown by an “*” indication) or system
settings that you have not saved.
About saving the pattern and kit
Parameters of the pattern or kit that you’re editing are remembered until you turn off the power. Even if you select a different pattern or kit,
and then re-select the one you had been editing, it is recalled in the edited state; however, if you turn the power off and on again, it returns
to the unedited state. If you want to keep the edits that you made to a pattern or kit, you must save that pattern or kit.
Saving the pattern and kit simultaneously (OVERWRITE)
By holding down the [SHIFT] button and pressing the [WRITE] button, you can overwrite-save the selected pattern and kit.
For details on how to save other settings, refer to “Saving the Pattern, Kit, or System Settings (WRITE)” (p. 17, p. 29).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
