Roland V-8HD - Page 45

45
Other Features
Loading
Here’s how to load the preset memory settings that are saved on
a USB ash drive. Doing this overwrites the preset memory (1–24)
settings.
1. Press the [MENU] button0“PRESET MEMORY”0
select “LOAD FROM USB MEMORY,” and press the
[VALUE] knob.
The preset les on the USB ash drive are shown as a list.
2. Use the [VALUE] knob to select the macro settings
le that you want to load, and press the [VALUE] knob.
A conrmation message appears.
* If you decide to cancel, press the [EXIT] button.
3. Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The preset memory is recalled. When the operation is nished, the
message “COMPLETE” appears.
4. Press the [MENU] button to close the menu.