Roland V-Drums TD-30 - Overall Settings for the TD-30 (SETUP); Setup Screen Navigation

114
“Setup” refers to the settings that apply in common to
the entire TD-30, such as output destination settings and
footswitch assignments.
To make setup settings, access the SETUP screen as
follows.
1. Press the [SETUP] button.
The [SETUP] button will light, and the SETUP A screen
will appear.
2. Press [F5] (A B C) button to access the screen
containing the item you want to set.
SETUP A screen
Button Explanation
[F1] (OUTPUT) button
Specify the output destination of
the sounds.
[F2] (CONTROL) button
Assign functions to footswitches or
pads (p. 117).
[F3] (OPTION) button
Make settings for the preview but-
ton, master compressor/equalizer,
MIX IN jack, and the display (p. 120).
[F4] (F RESET) button
Return the TD-30 to the factory
settings (p. 122).
SETUP B screen
Button Explanation
[F1] (KIT SEL) button
Play a kit from a USB ash drive
without loading it (p. 123).
[F2] (GAIN) button
Adjust the digital output volume
(p. 124).
[F3] (MIDI) button
Allow you to make MIDI settings
(p. 141).
SETUP B screen
Button Explanation
[F1] (AUTO OFF) button
Make settings for the auto o
function (p. 124).
[F2] (V. CTRL) button
Make settings for the VISUAL
CONTROL function (p. 146).
[F4] (INFO) button
View information about the TD-30
(p. 125).
Overall Settings for the TD-30 (SETUP)