Roland V-Drums TD-30 - Playing Audio Files from USB

Song Player
86
Playing an Audio File
Here’s how to play back audio les from your USB
ash drive.
* On-board patterns will not function while an audio
le is playing.
MEMO
You can also use a footswitch or pad to start playback
(p. 117).
1. Connect your USB ash drive to the TD-30’s USB
memory port (p. 85).
2. Press the [USB/PTN] button.
The [USB/PTN] button will light.
3. Press the [F1] (USB PTN) button to access the
USB SONG screen.
Audio le name
Current playback location in the audio le
4. Use the [–] [+] buttons or the dial to select the
audio le that you want to play.
5. Press the [PLAY] button.
The [PLAY] button will light, and the audio le will start
playing.
Button Explanation
[STOP] button
Stops the playback.
When you press the [PLAY] button
once again, playback will resume
from the location at which you
stopped.
Cursor [
] button
Returns to the beginning of the
audio le.
Cursor [
] button
Advances to the end of the
pattern.
Cursor [
] button
Rewinds the audio le.
Cursor [
] button
Fast-forwards the audio le.
Selecting an Audio File from a List
(LIST)
Here’s how to select an audio le from a list.
1. In the USB SONG screen, hold down the [SHIFT]
button and press the [F1] (LIST) button.
The USB SONG LIST screen will appear.
Button Explanation
[F1] (
PAGE) button
Displays the previous page of
the list.
[F2] (PAGE
) button Displays the next page of the list.
2. Use the dial, the [–] [+] buttons, or the cursor [ ]
[ ] buttons to select the desired audio le.
3. Press the [EXIT] button to return to the USB
SONG screen.