Roland V-Drums TD-30 - Rear Panel Connections (Continued)

AppendicesExpansionSettingsPerformanceSetupOverview
Panel Descriptions
25
MIDI connectors
Use these connectors to
connect MIDI equipment
(p. 141).
USB COMPUTER port
With a USB cable, you can connect the TD-30 to
your computer for recording MIDI information to
your software sequencer (DAW) (p. 140).
USB MEMORY port
You can connect a USB ash drive
(separately sold) here (p. 85). You can
play back audio les from it (p. 86),
or save the TD-30’s settings to the
USB ash drive (p. 108).
[ON] switch
This switch turns the unit on/o (p. 39).
AC IN jack
Connect the included AC power cable to
this inlet.
TRIGGER INPUT jacks
Connect your pads, cymbals, hi-hat, and kick etc. to these jacks (p. 37).
* Use a stereo cable (1/4-inch TRS phone type) if you’re connecting a dual-trigger type pad.