Overall Settings for the TD-30 (SETUP)
125
Viewing the Remaining Memory
and the Program Version (INFO)
Here’s how to check the remaining amount of internal
memory, or verify the program version.
1. In the SETUP C screen (p. 114), press the [F4] (INFO)
button.
2. Use the function buttons to display the status
you want to see.
[F1] (PATTERN) button
Pattern and internal memory usage status
[F2] (USB MEM) button
USB ash drive information
[F5] (VERSION) button
TD-30’s internal program version
3. Press the [EXIT] button to return to the SETUP
screen.
AppendicesExpansionSettingsPerformanceSetupOverview
To Next Page
Loading...
