EasyManua.ls Logo

Roland V-Drums TD-30 - Page 95

Roland V-Drums TD-30
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pattern Sequencer
95
Naming a percussion set (NAME)
The percussion set can be named (up to 12 characters).
1. In the PERCUSSION SET EDIT screen (p. 94), press
the [F2] (NAME) button.
The PERCUSSION SET NAME screen will appear.
2. Edit the name.
For details on how to edit a name, refer to Assigning a
Name” (p. 29).
3. Press the [EXIT] button to return to the
PERCUSSION SET EDIT screen.
Copying a percussion set
You can copy a percussion set from preset memory or
from a USB ash drive.
For user memory, you can rearrange the data by
exchanging the copy-source and copy-destination
percussion sets.
NOTE
When you execute the copy, the contents of the
copy-destination will be overwritten. If you want to
keep those settings, back them up to a USB ash drive
before you continue (p. 108).
1. Hold down the [SHIFT] button and press the
[USB MEM] button.
[USB MEM] button will light, and the COPY A screen will
appear.
2. Press the [F5] (A B C) button twice to access the
COPY C screen.
3. Press the [F3] (PERC) button.
Copy-source
Copy-destination
4. Use the [F1]–[F3] buttons to select the copy-
source.
Button Explanation
[F1] (USER) button
Copy from user memory.
Exchanging the copy-source and
copy-destination is possible only if
the copy-source is user memory.
[F2] (PRESET) button
Copy from preset memory.
Choose this when you want to
revert to the factory settings.
[F3] (USB) button
Copy from backup data saved on a
USB ash drive.
5. Use the cursor buttons, [–] [+] buttons, and dial
to specify the copy-source and copy-destination.
If you selected [F3] (USB) in step 4, select the copy-source
backup number.
6. Press the [F4] (EXCHNG) or [F5] (COPY) button.
A conrmation message will appear.
(Example: Copying settings from a USB ash drive)
If you selected [F1] (USER) in step 3, you can exchange
the copy-source and copy-destination by pressing the
[F4] (EXCHNG) button.
Press the [F5] (COPY) button to execute the copy.
If you decide to cancel the copy or exchange, press the
[F1] (CANCEL) button.
7. Press the [F5] (EXECUTE) button.
The percussion set will copied.
AppendicesExpansionSettingsPerformanceSetupOverview

Table of Contents

Related product manuals