Ross Carbonite Series Setup Manual

Memory Bank Button Behavior (C2S/C2X/C3S/C3X)...........35
To Set the Bank Button Behavior.....................................35
Memory Button Behavior (Not available on C1-A or C10)......35
To Set the Memory Button Behavior.................................35
Memory Recall Behavior (C10/C1)........................................36
To Set the Memory Recall Behavior.................................36
Next Button Secondary Function...........................................36
To Set the NEXT Button Secondary Function..................36
Next Transition Follow...........................................................36
To Set the Next Transition Follow Behavior......................36
Next Transition Reset............................................................36
To Set the Next Transition Reset Behavior.......................36
Power-Save Mode.................................................................36
To Set the Power Save Mode and Timer..........................36
Roll GPO/Roll Clip.................................................................37
To Set the Roll GPO/Clip Behavior...................................37
Transition Rate Units.............................................................37
To Set the Units Used for Transition Rates......................37
Undo Memory Recall.............................................................37
To Turn Undo Memory Recall Off.....................................37
User Buttons..........................................................................37
To Set A User Button........................................................37
Switcher Resources..................................38
Switcher Resources...............................................................38
DVE Resource Capture....................................................38
Chroma Key Resource Capture.......................................38
Switcher Modes.........................................39
To Set the Switcher Mode......................................................39
Network Connections...............................40
Network Setup.......................................................................40
To View the Current Network Settings..............................40
To Set an IP Address Using DHCP..................................40
To Set a Static IP Address................................................40
FTP Connection (RossLinq)..................................................41
To Create an FTP Connection with Windows 7................41
GPI Control.................................................42
GPI Trigger Types..................................................................42
GPI Setup..............................................................................42
To Set Up a GPI Input......................................................42
To Set Up a GPI Output....................................................43
GPI Output Triggers...............................................................43
To Assign a GPI Output to a Video Source......................43
To Set a GPI to Be Triggered Manually............................43
Live Edit Decision Lists............................44
LiveEDL Setup.......................................................................44
To Set the LiveEDL Behavior...........................................44
Timecode Setup.....................................................................44
To Confirm External LTC Signal.......................................44
To Set the LTC Timecode Source.....................................44
LiveEDL Data Capture...........................................................45
To Start Capturing EDL Data............................................45
To Stop Capturing and Save EDL Data............................45
Diagnostics and Calibration.....................46
Switcher Information and Logs..............................................46
Switcher Status in DashBoard..........................................46
To View the Software Version...........................................46
To Copy Logs To a USB...................................................46
Calibration.............................................................................46
To Calibrate the Switcher.................................................46
System Real-Time Clock.......................................................47
To Set the System Real-Time Clock.................................47
Diagnostics............................................................................47
Frame Diagnostic LEDs...................................................47
Frame DIP Switches.........................................................47
To Run the Control Panel Test..........................................47
To Run the LED Test........................................................47
To Run the Display Test....................................................47
To Run the RAM Test.......................................................48
To Run the Tally Test........................................................48
To Run the GPI Input Test................................................48
To Run the GPI Output Test.............................................48
Error Messages.....................................................................48
Specifications............................................49
Operating Temperature..........................................................49
Video Input Specifications.....................................................49
Video Output Specifications..................................................49
Audio Specifications..............................................................49
Power Rating.........................................................................49
Serial Port..............................................................................49
GPI Port.................................................................................50
Tally Port................................................................................50
Glossary.....................................................51
8 • Contents — Carbonite Setup Manual (v10.0)
USO RESTRITO

Ross Carbonite Series Specifications

General

Brand	Ross
Model	Carbonite Series
Category	Switch
Language	English