Set up the Connection to the PC
AC-115 Software Installation and User’s Guide Page 10
2. Set up the Connection to the PC
Now that you have successfully installed the software, you’re
ready to start using it. However, before you begin using the
software, it is important to make sure the AC-115 hardware is
attached correctly.
This chapter explains how to attach the AC-115 hardware to a
PC and check to make sure that the communication between
the AC-115 and the PC is really working.
To do this, you will learn how to login to the software, how to
set up your serial port (COM port) and you will get a brief
introduction to the software’s Main Window.
The topics in this chapter are:
• Connect the AC-115 to your PC
• Start the Software and Log In
• Introduction to the Main Window
• Serial Port (COM Port)
• Set Up Your Preferred Language
• Configure the Operators
• Add an Operator
• Remove an Operator
• Operator Properties
• PC Software Database Status
To Next Page
Loading...
