Rotax MML-912 - Page 134

d02880.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
12-20-00
page 36
October 01/2009
Graphic
Option 3
Fig. 18 08660
Option 3
Step Procedure
1 Remove hex. screw (1) M6x6 from intake manifold (2) and connect the vacuum
gauge.
2 Remove the compensating tube (3) with attached tubes (4) (connection be-
tween intake manifolds) and plug the fittings in the intake manifolds.
3 After synchronization tightened the screw M6x6 (1) with LOCTITE 221.
Part Function
1 Hex. screw M6x6
2 Intake manifold
3 Compensating tube
4Tube
2
1
2
1
3
4