Rotax MML-912 - REPLENISHING OPERATING FLUIDS; Introduction

d02879.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
12-10-00
page 1
October 01/2009
Chapter: 12-10-00
REPLENISHING OPERATING FLUIDS
Introduction The engine should always be in a horizontal position before checking the
fill levels.
Table of contents This chapter covers the steps required to replenish all operating fluids on
the engine and also provides an overview of the fill capacities.
Subject Page
General note page 3
Fluid capacities page 5
Cooling system
Coolant check/replenish
page 7
page 7
Lubrication system
Oil level check/replenish
page 9
page 9