d02873.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
00-00-00
page 13
October 01/2009
3.3) Maintenance Concept
General note The maintenance functions detailed in this Manual fall into two catego-
ries:
- Maintenance I (Line Maintenance)
- Maintenance II (Heavy Maintenance)
Repairs beyond the levels detailed in this Manual are not recommended
as maintenance functions and must be done by an authorized overhaul
facility.
Maintenance I
(Line Mainte-
nance)
Chapter 00,05 and 12
The scope of line maintenance consists of removal, installation and
adjustment of engine components (including part wear). All procedures in
this Manual are to be considered line maintenance.
NOTES: Where applicable, you will be referred to the Heavy Main-
tenance Manual for work above and beyond line mainten-
nace.
Maintenance II
(Heavy Mainte-
nance)
separate Manual
Maintenance Manual II details removal, installation and repair of compo-
nents or parts normally considered beyond the capabilities of the "Line
Maintenance".
NOTES: This Manual can only be used in combination with Main-
tenance Manual I (Line Maintenance), as it builds up on it.
To Next Page
Loading...
