d02873.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
00-00-00
page 9
October 01/2009
3) Safety notice
General note Although the reading of such information does not eliminate the hazard,
understanding the information will promote its correct use. Always use
common workshop safety practice.
The information and components-/system descriptions contained in this
Manual are correct at the time of publication. BRP-Powertrain, however,
maintains a policy of continuous improvement of its products without
imposing upon itself any obligation to install them on its products previ-
ously manufactured.
Revision BRP-Powertrain reserves the right at any time, and without incurring obli-
gation, to remove, replace or discontinue any design, specification, fea-
ture or otherwise.
Measure Specifications are given in the SI metric system with the USA equivalent
in parenthesis.
Symbols used This Manual uses the following symbols to emphasize particular informa-
tion. This information is important and must be observed.
NOTES: Indicates supplementary information which may be
needed to fully complete or understand an instruc-
tion.
A revision bar outside of the page margin indicates a
change to text or graphic.
WARNUNG
WARNING
Identifies an instruction which, if not followed,
may cause serious injury including the possibility
of death.
WARNUNG
CAUTION
Identifies an instruction which, if not followed,
may cause minor or moderate injury.
WARNUNG
NOTICE
Denotes an instruction which, if not followed, may
severely damage the engine or other component.
To Next Page
Loading...
