d02876.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
05-20-00
page 14
October 01/2009
Inspect all oil lines for damage, leakage, hardening
from heat, porosity, security of connections and at-
tachments. Verify routing is free of kinks and restric-
tions.
X 12-20-00
sec. 4)
Inspect all fuel lines for damage, leakage, hardening
from heat, porosity, security connections and attach-
ments. Verify routing is free of kinks and restrictions.
In the case of steel fuel lines (912 F, 912 S and/or op-
tional), also check for any cracks and/or scuffing
marks.
X 12-20-00
sec. 4)
Inspect the wiring and its connections for secure fit,
damage and signs of wear.
X 12-20-00
sec. 14.1)
2.) Magnetic plug
Check the magnetic plug.
X 12-20-00
sec. 12)
3.) Compression check
Check the compression by the differential pressure
method.
Test pressure________hPa (psi)
every 200 hr. 12-20-00
sec. 5)
4.) Checking the engine suspension
Inspect engine suspension and fasteners for secure
fit, including damage from heat, deformation, cracks.
X 12-20-00
sec. 3.1)
5.) Engine external parts
Inspect screws and nuts of all external parts for tight
fit. Inspect safety wiring, replace as necessary.
X
6.) Engine cleaning
Engine cleaning
X 12-20-00
sec. 1)
7.) Checking the air filter
Checking the air filter.
X 12-20-00
sec. 2)
Points of Inspection
Interval
Operating hours
Chapter
Reference
Signature
as
indicated
100 hr.
Pressure drop (% or fraction)
Cyl # 1 2 3 4
bar/psi
To Next Page
Loading...
