Brief description
Measurement Start up
Push buttons and display
pag. 51
ST2 User’s Manual
TV and SAT Features
22.0 MPEG PROG SERVICE
Every transponder carries a given number of TV and Radio programmes.
This function will display the full programme list of the broadcasted program-
mes. Besides the services names also the audio and video PID values are
provided.
• Tune a digital satellite transponder (Ref. section 15.0).
• Press the MPEG PROG SERVICE [1] key,
• After some seconds a full list of transmitted services from the specifi c satellite
will be displayed,
• Use the UP [7] and DOWN [9] keys to go through the full list.
Lock the wanted transponder (Ref. section 15.0) and press the
key to get the full programme list and relevant audio and video PIDs as
shown in fi gure here below.
programme name
Video PID Audio PID
Encripted Y= SI, N=NO
To Next Page
Loading...
