Brief description
Measurement start up
pag. 28
ST2 User’s Manual
TV Mode
7.0 MEMORY: MEMORISATION FUNCTION
The Memory function allows you to modify an existing Memory Plan or to defi ne
a new one.
7.1 How to create a new memory plan:
• Press MEMORY key [11],
• Use SELECT [10], UP [7] and DOWN [9] keys to choose a new memory plan
(See Fig. 7.1), the PLAN name is automatically assigned by the meter and will
be the word “PLAN” followed by the fi rst available number (i.e. PLAN45),
• Use the SELECT [10] key to chose the tuning fi elds that degine the channel to
be memorised (See Fig. 7.1 and Notes),
• Use the SELECT [10] key to highlight the Save? option and press UP [7] or
DOWN [9] to memorise.
7.2 How to modify an existing memory plan:
• Press the Memory [11] key,
• Use SELECT [10],UP [7] and DOWN [9] keys to select an existing memory
plan (See Fig. 7.1),
• Use the SELECT [10] key to highlight the tuning fi eld that needs to be modifi ed
(See notes),
• Highlight the OVERWRITE? string to modify the selected programme.
7.3 How to add a programme to an existing memory plan:
• Press the MEMORY [11] key,
• Follow the procedure described in point 7.2 with the only difference that you must select
a new programme number (see Fig. 7.1),
• The status line on the bottom part of the display will show the string SAVE?, use the UP
[7] or DOWN [9] keys to save a new programme in the memory plan.
To Next Page
Loading...
