Chapter 4 • TheaterTouch Designer Basics
25
Remotes are listed by manufacturer, type, and model in the
Select Remote from
Library
window; use this to select the remote you would like to assign codes from.
Remotes that have already been used in the current remote file will be moved to the
top of the list and their icon will turn red for easy identification.
3. If the remote is in a different library or no library is open, click on the
Open Library
button to find the library you are looking for.
4. Click on the remote you would like to assign codes from and the
Command Library
will open again.
5. Place the mouse cursor over the function in the
Command Library
that
you want to assign.
6. Click and hold the left mouse button.
7. Drag the mouse cursor to the button on which you want to place the
command.
8. Release the left mouse button.
If you drag a command to a spot on the touchscreen grid where there are no buttons,
TheaterTouch Designer will automatically create a button and insert the text for that
command.
To Next Page
Loading...
Need help?
General
