TheaterTouch System Controller
48
HOW TO EDIT THE REMOTE PROPERTIES
The
Remote Properties
dialog box allows you to change settings that affect the entire
remote.
To open the
Remote Properties
dialog box:
Choose
Edit Remote Properties
from the
Edit
menu.
POWER TAB
The
Power
tab options are:
Power Down Time:
This allows you to adjust the to time the unit stays awake
after the last button press. The time is variable from 1 second to 60 seconds
(default is 10 seconds). During sleep mode, the TheaterTouch uses virtually no
battery power.
Display Mode:
The option buttons allows you to adjust the settings of the display
and keypad backlight.
The options are:
1.
Any keypress (default)
, which turns the display and button backlight on
when any
button is pressed.
2.
Touchscreen or backlight key
, which turns the display and button
backlight on only
when the touchscreen or backlight key is pressed. This
allows the volume/channel/etc. keys to be used without turning on the
display and backlight each time.
Tilt Switch:
(default is: active)
The Tilt Switch check box allows you to turn the
tilt switch on or off. When the box is checked, it means the tilt switch is active and
will turn on the display and button backlight when picked up.
To Next Page
Loading...
Need help?
General
