RTI TheaterTouch T2 - How to Remove Page Links; How to Add Commands to Buttons

TheaterTouch System Controller
24
HOW TO REMOVE PAGE LINKS
1. Select the
Assign Pages
tool from the
Tool Palette
.
2. Place the mouse cursor over the button from which you wish to remove
the page link.
3. Click the left mouse button.
4. Select the
<none>
item from the bottom of the pop-up menu.
HOW TO ADD COMMANDS TO BUTTONS
IR commands are indicated by a small red box with the letter ‘C’ in the upper right
corner of buttons.
1. Select the
Command Library
tool
from the
Tool Palette
.
2. Click the
Select New Remote
button in the
Command Library
window to
select a different remote than displayed.