RTI TheaterTouch T2 User Manual

TheaterTouch System Controller
72
HOW TO USE THE NEW REMOTE WIZARD
If you are entering a commonly used component to the IR Library, you can use the
New Remote Wizard
to enter the titles of commonly use commands for that type of
equipment.
1. Open the
Create New Remote
dialog box.
2. Enter the information on the equipment you are about to learn commands
from. The manufacturers name, type of equipment, (such as TV, VCR,
Drapes, Lights and so on) and model number of the component or remote
in the appropriate fields.
3. Click the
Wizard
command button; this will open the
New Remote
Wizard
dialog box.
4. Check or uncheck the function titles you wish to insert and click
OK
.
5. You can always edit the name of a function later if you make a mistake or
add a function.
6. When done entering information about new remote, click on the
OK
command button to save and close.

RTI TheaterTouch T2 Specifications

General

Brand	RTI
Model	TheaterTouch T2
Category	Remote Control
Language	English