RTI TheaterTouch T2 User Manual

TheaterTouch System Controller
28
HOW TO SETUP COMMUNICATIONS
The
Communications Setup
dialog box is for setting up communications between
the TheaterTouch and your PC.
To open the
Communications Setup
dialog box:
Choose
Set COM Port
from the
Options
menu.
Com Port group box -
Choose the COM Port that the TheaterTouch is connected
to.
Auto Detect -
Click this button to have TheaterTouch Designer attempt to
automatically locate the correct COM port. The TheaterTouch must be connected to
the computer with the programming cable and in
Computer Link
mode, if you
need help with
Computer Link
mode see the Control Panel section on page 8.
Maximum Comm Speed -
Choose a lower speed from this list if you are having
problems communicating with the TheaterTouch system controller. The default is
High.

RTI TheaterTouch T2 Specifications

General

Brand	RTI
Model	TheaterTouch T2
Category	Remote Control
Language	English