To Next Page

To Previous Page

TheaterTouch System Controller

Now press and hold the key on the donor remote control that transmits

the command that you want the TheaterTouch to learn.

Continue to hold

the key down until the

TheaterTouch

displays OK.

After the command has been processed, the TheaterTouch will display

Captured

then

Sending

. If an error message is displayed, realign the

donor remote control and try again.

If the IR command was captured properly, it will be stored in a temporary

memory buffer, and transferred to the Infrared Library Manager software

automatically. A red dot will be placed in front of the function text to let

you know that the function has been learned.

The command will remain in memory (for testing) until it is overwritten

by the next captured command. The software will prompt you for each

function command to be learned.

5. To close the

IR Capture

window in the software click on the

button.

6. To close the

IR Capture

page on the remote, press the

Main Menu

button

on the keypad. The remote will stay in the

IR Capture

mode until you

manually press the

Main Menu

button.

RTI TheaterTouch T2 User Manual

Questions and Answers: