52
ANSWERING MACHINE
Select OUTGOING MESS.. Press Valid. .
Select DELETE ALL using or . Press
Valid. .
Press Yes to delete all the personal
outgoing messages.
Playing messages
When there are messages on your
answering machine, the base indicator light
blinks. The rhythm of the flash informs you as
to the number of messages received (ex.:
4 short flashes correspond to 4 received
messages).
The new messages are played back first.
Afterwards, the messages that have already
been taken are played back in chronological
order (from the oldest messages to the most
recent messages).
Playing messages using the base
Press the button to start the playback.
Your messages are played back through the
base loudspeaker.
During playback, you can use the base
buttons to execute the following actions:
• Go to the next message : .
• Go back to the beginning of the
message : .
The icon on the handset screen
notifies you that there are messages
that have not been played.
If you saved one or more played
messages, the icon appears on
the welcome screen.
• Return to the previous message :
twice.
• Pause playback : .
• Start playback after pause : .
• Delete the message being played back :
long press on .
The answering machine will automatically
stop at the end of the last message.
Playing messages using the handset
On the navigator key , press or
until the ANS. MACH screen is displayed.
Press OK to confirm.
Select MESSAGES using or . Press
Valid. .
Select PLAY using or . Press Valid. .
The messages are played through the
handset speaker.
Depending on your service provider and your
subscription, the name and number of your
contact will be displayed on the screen
(except for confidential calls).
During playback, you can use the handset
buttons to execute the following actions:
- : delete the message being played.
- : return to the previous message.
- : momentarily stop the playback
(pause).
- : go to the next message.
LU 252973993 D30 T V H Australie.book Page 52 Mercredi, 20. juin 2007 9:47 09
To Next Page
Loading...
Need help?
General
